GW Instek GDS-3000 Series Programming Manual - Manual (Page 86)

GDS-3000 Programming Manual
86
Syntax :TRIGger:DELay:LEVel {<NRf> | ?}
Parameter <NRf> Delay trigger level
Return parameter Returns the delay trigger as <NR3>
Example :TRIGger:DELay:LEVel 5.00E-3
Sets the delay trigger to 5mV/mA.
:TRIGger:PULSEWidth:POLarity
Set
Query
Description Sets or queries the pulse width trigger polarity.
Syntax :TRIGger:PULSEWidth:POLarity {POSitive | NEGative
| ?}
Parameter POSitive Positive polarity
NEGative Negative polarity
Return parameter Returns the pulse width polarity.
Example :TRIGger:PULSEWidth:POLarity POSitive
Sets the pulse width polarity to positive.
:TRIGger:RUNT:POLarity
Set
Query
Description Sets or queries the Pulse Runt trigger polarity.
Syntax :TRIGger:RUNT:POLarity {POSitive | NEGative |
EITher | ?}
Parameter POSitive Positive polarity
NEGative Negative polarity
EITher Positive or negative polarity
Return parameter Returns the pulse runt trigger polarity.
Example :TRIGger:RUNT:POLarity POSitive
Sets the Pulse Runt trigger polarity to positive.