GW Instek GDS-3000 Series Programming Manual - Manual (Page 34)

GDS-3000 Programming Manual
34
Syntax :ACQuire:AVERage {2 | 4 | 8 | 16 | 32 | 64 | 128 | 256
| ?}
Parameter 2, 4, 8 ,16, 32, 64, 128, 256
Note Before using this command, select the average
acquisition mode. See the example below.
Example :ACQuire:MODe AVERage
:ACQuire:AVERage 2
Selects the average acquisition mode, and sets the
average number to 2.
:ACQuire:MODe
Set
Query
Description Selects or returns the acquisition mode.
Syntax :ACQuire:MODe {SAMPle | PDETect | HIRes |
AVERage | ?}
Parameter SAMPle Sample mode
sampling PDETect Peak detect
sampling
HIRes Hi resolution
sampling AVERage Average
sampling mode
Example :ACQuire:MODe PDETect
Sets the sampling mode to peak detection.
:ACQuire<x>:MEMory?
Query
Description Returns the data in acquisition memory for the
selected channel as a single string.
Syntax :ACQuire<x>:MEMory?
Parameter <x> Channel
1/2/3/4 Channel 1/2/3/4