GW Instek GDS-3000 Series Programming Manual - Manual (Page 60)

GDS-3000 Programming Manual
60
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce CH1
:MEASure:FALL?
Selects Channel 1, and then measures the fall time.
:MEASure:FOVShoot
Query
Description Returns the fall overshoot amplitude.
Syntax :MEASure:FOVShoot{?}
Return parameter Returns the fall overshoot as a percentage, <NR3>
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:FOVShoot?
1.27E+0
Selects Channel 1, and then measures the fall
overshoot.
:MEASure:FPReshoot
Query
Description Returns fall preshoot amplitude.
Syntax :MEASure:FPReshoot{?}
Returns Returns the fall preshoot as <NR3>.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:FPReshoot?
Selects Channel 1, and then measures the fall
preshoot.