GW Instek GDS-3000 Series Programming Manual - Manual (Page 62)

GDS-3000 Programming Manual
62
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH 1
:MEASure:PDUTy?
5.000E+01
Selects Channel 1, and then measures the positive
duty cycle.
:MEASure:PERiod
Query
Description Returns the period.
Syntax :MEASure:PERiod{?}
Return parameter Returns the period as <NR3>
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH 1
:MEASure:PERiod?
1.0E-3
Selects Channel 1, and then measures the period.
:MEASure:PWIDth
Query
Description Returns the first positive pulse width.
Syntax :MEASure:PWIDth{?}
Return parameter Returns the first positive pulse width as <NR3>
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH 1
:MEASure:PWIDth?
5.0E-6
Selects Channel 1, and then measures the positive
pulse width.