GW Instek GDS-3000 Series Programming Manual - Manual (Page 48)

GDS-3000 Programming Manual
48
Example :CURSor:MODe OFF
Turns the cursors off.
:CURSor:SOURce
Set
Query
Description Sets or queries the cursor source.
Syntax :CURSor:SOURce {CH1 | CH2 |CH3 | CH4 |REF1
|REF2 |REF3 |REF4 | ?}
Parameter CH1~CH4 Channel 1 to 4
REF1~4 Reference waveform 1 to 4
Return parameter Returns the cursor source.
Example :CURSor:SOURce CH1
Turns the cursors source as channel 1.
:CURSor:H1Position
Set
Query
Description Sets the first horizontal cursor (H1) position.
Syntax :CURSor:H1Position {<NRf>| ?}
Parameter <NRf> Horizontal position
Return parameter Returns the cursor position.
Example :CURSor:H1Position?
-1.34E-3
Returns the H1 cursor position as -1.34ms.
:CURSor:H2Position
Set
Query
Description Sets the second horizontal cursor (H2) position.
Syntax :CURSor:H2Position {<NRf> | ?}
Parameter <NRf> Horizontal Position
Return parameter Returns the cursor position.