GW Instek GDS-3000 Series Programming Manual - Manual (Page 91)

COMMAND DETAILS
91
EITher Sets the triggering point as either
stays high or stays low.
Example :TRIGger:TIMEOut:WHEn HIGH
Sets the triggering point to when the signal stays
high.
:TRIGger:TIMEOut:TIMER
Set
Query
Description Sets or queries the timeout trigger timer settings
(in seconds).
Note: Only applicable for 500MHz models with the
Timeout trigger APP installed.
Syntax :TRIGger:TIMEOut:TIMER {<NRf> | ?}
Related
commands :TRIGger:TIMEOut:WHEn
Parameter/
Return parameter <NRf> Time out time in seconds.
(10nS~10.0S)
Example :TRIGger:TIMEOut:TIMER 1.00e+1
Sets the timeout time to 10 seconds.
System Commands
:SYSTem:LOCK {OFF|ON|?} .......................................91
:SYSTem:LOCK {OFF|ON|?}
Set
Query
Description Turns the panel lock on off.
Syntax :SYSTem:LOCK {OFF|ON|?}
Parameter OFF System lock off
ON System lock on
Return parameter Returns the status of the panel lock (ON, OFF).