GW Instek PEL-3000 Series User Manual - Manual (Page 122)

PEL-3000 User Manual
120
For example:
To load Preset Data P7 from USB, you must
first load Preset Data P0~P9 to internal
memory, then from internal memory load
Preset P7 to be the active preset setting.
For normal and fast sequences however, files
can be saved or recalled directly to/from USB
memory.
File Types
Memory Data Memory data contains general settings and is
used for creating programs. Memory Data
contains the operating mode, range, response
and Go/NoGo settings. Memory data can be
stored both internally and externally to USB.
Preset data and Memory data store the same
contents.
Internal Format M001 ~ M256
External Format model no_file no.M
example: 3021_01.M
Setup Data Setup data contains all general configuration
settings, protection settings, program and
program chain settings, as well as parallel
configuration settings.
Internal Format 1 ~ 100
External Format model no_file no.S
example: 3021_00.S