GW Instek PEL-3000 Series User Manual - Manual (Page 44)

PEL-3000 User Manual
42
Toggle Parameter
or State
Mode
CC
Function/Item
Parameter or State
This type of soft-menu icon has the
function/item on the top of the label and the
selected setting or mode on the bottom of the
label.
Repeatedly press the associated function key
(F1~F5) to cycle through each setting. For
example, repeatedly pressing the Mode soft-
menu key will cycle through the CC, CR, CV
and CP modes.
Mode
CR
Mode
CC
Mode
CV
Mode
CP
For some parameters, a popup window will
also appear. Selection of the setting is the same.
Repeatedly pressing the relevant function key
(F1~F5) will cycle through each setting. The
selection on the popup window will also be
reflected on the label.
Mode
CC
I Range
H 35A
V Range
L 15V
Function
Static
Configure
0.000
V
0.000
A
0.00
w
SlewRate 2500.00
CC B Value 0.000
CC A Value 0.000
LOAD RS232 SHORT
A Value
Fine
03/09/12
mA/uS
A
A
LOW
Middle
High
0.35A
3.5A
35A
label
Popup window
Parameter selection