First time use instructions, Rack mount kits – GW Instek PEL-3000 Series User Manual User Manual
Page 26
PEL-3000 User Manual
24
First Time Use Instructions
Use the procedures below when first using the PEL-3000 to install
the rack mount kit, power up the instrument, set the internal clock,
restore the factory default settings and check the firmware version.
Lastly, the Conventions section will introduce you to the basic
operating conventions used throughout the user manual.
Rack Mount Kits
Description
The PEL-3000 has a number of rack mount
options for installation. The GRA-413 rack
mounts are suitable for the PEL-3211 booster
pack. The GRA-414 rack mounts are capable of
holding 1x PEL-3111 or
2x PEL-3021/3041 units.
For installation details, please see the GRA-413
and GRA-414 Rack Mount Assembly Manual.
Please see your distributor for which rack
mount is suitable for your application.