GW Instek PEL-3000 Series User Manual - Manual (Page 198)

PEL-3000 User Manual
196
CC Mode
Model PEL-3021 PEL-3041 PEL-3111
Operating Range
H Range
0A~35A 0A~70A 0A~210A
M Range 0A~3.5A 0A~7A 0A~21A
L Range 0A~0.35A 0A~0.7A 0A~2.1A
Setting Range
H Range
0A~35.7A 0A~71.4A 0A~214.2A
M Range 0A~3.57A 0A~7.14A 0A~21.42A
L Range 0A~0.357A 0A~0.714A 0A~2.142A
Default Setting
H Range
0A 0A 0A
M Range 0A 0A 0A
L Range 0A 0A 0A
Resolution
H Range
1mA 2mA 10mA
M Range 0.1mA 0.2mA 1mA
L Range 0.01mA 0.02mA 0.1mA
Accuracy of Setting
H, M Range ±(0.2 % of set + 0.1 % of f.s
*1 ) + Vin *2 /500 kΩ
L Range ±(0.2 % of set + 0.1 % of f.s) + Vin *2 /500 kΩ
Parallel
Operation
±(1.2% of set +1.1% of f.s .*3 )
Input Voltage Variation *4
H Range 2mA 4mA 10mA
M Range 2mA 4mA 10mA
L Range 0.1mA 0.2mA 0.6mA
Ripple
RMS
*5 3mA 5mA 20mA *7
P-P *6 30mA 50mA 100mA *7
*1 Full scale of H range
*2 Vin: input terminal voltage of electronic load
*3 M range applies to the full scale of H range
*4 When the input voltage is varied from 1.5V to 150V at a current of rated
power/150V
*5 Measurement frequency bandwidth: 10Hz to 1MHz
*6 Measurement frequency bandwidth: 10Hz to 20MHz
*7 At measurement current of 100A