INOR IPAQ R520X - Manual (Page 27)

5 OPERATION C520/C520X / R520/R520X
09/2010 • 86B5200001 www.inor.com 27
The transmitters are delivered with either a factory settings or configured according to
customers’ specifications.
Menu Designation Parameter Factory setting
Device Root menu
-> Sensors -> Channel 1 Type of sensor 1 RTD Pt100 α=0.003850
Number of wires 4
PV Lower range value 0
PV Upper range value 100
Digital units °C
Lock Code Unlocked
Damping value 4 s
Line frequency 55
Isolation Resistance monitoring Off
Sensor Break
(Off/Downscale/Upscale) Upscale
Sensor Short circuit
(Off/Downscale/Upscale) Upscale
Sensor Drift
(Off/Downscale/Upscale) Off
-> Channel 2 Type of sensor 2 None
Number of wires
PV Lower range value
PV Upper range value
Digital units °C
Lock Code Unlocked
Damping value 4 s
Line frequency 55
Isolation Resistance monitoring Off
Sensor Break
(Off/Downscale/Upscale) Off
Sensor Short circuit
(Off/Downscale/Upscale) Off
Sensor Drift
(Off/Downscale/Upscale) Off
Table 3: The factory settings for C520/C520X / R520/R520X transmitters