KROHNE BM 102 Handbook User Manual
Page 26
Advertising
26
BM 102
6. After the connection has been established, the following screen is shown. This will show the
current status of the tank. No further configuration should be necessary. The following functions
are available on the screen and will be discussed further in section 8.4:
• F2 – Device configuration: a summary of the parameters are given on the next page,
• F7 – Oscilloscope function: have all reflections occurring at the probe displayed,
• F11 – Dynamic/on-line device configuration,
• F4 – View and record all information during operation,
• F6 – Trend: observe the level trend since start of the program,
• F8 – Marker: read the status of the device
• and F10 – make printouts (screen shots).
Advertising