KROHNE BM 102 Handbook - Manual (Page 4)

4 BM 102
Device description and range of applications
The BM 102 MICROFLEX level gauge uses the Time Domain Reflectometry (TDR) measuring
principle and two-wire technology for level measurement. It is designed solely for measuring the
distance, level, volume and ullage of liquids, pastes, slurries and powder products. It can continue to
measure the level or distance and total volume in applications with two products.
The level measurement data can be displayed and the gauge configured using either a HART
Handheld Communicator console (HHC) or a PC work station equipped with PCSTAR2 software
supplied as standard with the gauge.
Principal gauge components
BM 102 housing and probes (non-Ex and Ex versions) with high-
temperature
option
with inactive
length
option
1
Nameplate (see next page for details)
2 Cable entry (output and power supply) to wiring compartment
3 Equi-potential bonding system connection (Ex – see section 2.1.4)
4 Flange (process connection onto tank or other suitable mounting)
5 Single cable probe
6 Counterweight (with threaded hole in base for anchoring)
7 Twin cable probe
8 Spacer
9
Chuck / ring (for single cable probes)
10 Turnbuckle (for twin or single cable probes)
11 Threaded process connection (e.g. 1” G, 1” NPT, …)
12 Coaxial probe
13 Extension tube for high temperature applications
14 Single rod probe
15 Inactive length: coaxial tube under the process connection (i.e. an inactive length of the
probe) for installations with long nozzles or concrete roofs – for single rod and single
cable probe versions only