Martel Electronics MasterCAL - Manual (Page 26)

MasterCAL
Users Manual
16
Table 3. Key Functions (cont)
No. Name Description
10
u , d , L , and
R
keys
•
Adjust the display contrast.
•
Make choices from lists on the display.
•
Increase or decrease the source level when using the step feature.
•
In calculator mode, provide arithmetic functions (+ -
ч Ч
).
11
e
key Terminates a numeric entry when setting a source value, or confirms your choice in a
list. In calculator mode, provides the equals arithmetic operator (=).
12
q key Toggles between resistance and continuity functions in MEASURE mode, or selects
the resistance function in SOURCE mode.
13 Numeric keypad Used whenever a numeric entry is required.
14
h
key Toggles between ac voltage and frequency functions in MEASURE mode, or selects
frequency output in SOURCE mode.
15
v
key Selects the dc voltage function in MEASURE mode, or selects dc voltage in SOURCE
mode.
16
o
key Turns the power on and off.