Martel Electronics MasterCAL - Manual (Page 34)

MasterCAL
Users Manual
24
Where ac power is available, you can use the
optional Fluke Model BE9005 Battery Eliminator to
conserve battery power. When the battery eliminator
is used, the battery is internally disconnected, and
can be removed from the calibrator. The battery
eliminator does not charge the battery. The battery
eliminator is handy for troubleshooting process
instruments on the workbench, and for long-term
data logging. When you calibrate an instrument, you
will get best results using battery power.
Selecting the Display Language
The calibrator displays information in five languages.
English is the default. To change the display
language, proceed as follows:
1. Press s .
2. Press the third softkey from the left twice.
3. Press d three times.
4. Press e .
5. Press u or d to highlight your choice of
language.
6. Press e to confirm your choice. The
language you choose is the power-up default.
7. Press s to exit Setup mode.
Adjusting the Display Contrast
Press u or R to increase contrast. Press d or L to
decrease contrast. When the u and d keys are
being used to select an item from a list, for example
in Setup mode, use the
L or R keys. In calculator
mode, all four direction keys are used for arithmetic
functions.
Displaying the Date and Time
The date and time can be shown at the top of the
display during normal operation. In Setup mode you
can turn this date and time display on or off. You can
also control the format used to display the date and
time. You should set the calendar and clock whether
or not you use the date and time display, since a
timestamp is applied to all saved results.