Thermo Fisher Scientific Eutech 2700 Series - Manual (Page 11)

7
Data Log (storing data to internal memory)
Select “ SINGLE” to manually save one point at a time. Press the “MEM IN”
function key any time during measurement to save data.
Select “
TIMED” to automatically save data at selectable intervals— ranging from
3 to 3600 seconds. Data will be collected until the data limit is reached or until
“ SINGLE” data log is selected. This feature is useful for gathering data from a
single sample over time. Note that “ MEM IN” is not available during TIMED
setting. As data is collected, the display will indicate how much memory has been
used.
To view stored data, use “ MEM OUT”. Note: the more data that has been
acquired memory, the longer the data will take to display.
Print Setup
Adjust the RS-232 output settings for baud rate, parity, data bit, and stop bit to
match your printer or computer settings as necessary.
Print Format
When utilizing the RS-232 output; choose “ TEXT/PRINTER” option to send the
data in an easily viewable format—best for printing.
Choose “ CYBERCOMM” option to send the data as a comma separated value
(CSV)—best for exporting data into spreadsheet software.
Print Set
This is identical to the Data log function, but data is sent via RS-232 output
instead of internal memory.
Select “
SINGLE” to manually output one value at a time—best for printing or
collecting data to your PC from many samples.
Select “
TIMED” to automatically output live data at selectable intervals— ranging
from 3 to 3600 seconds. Data will be output until “ SINGLE” Print set is selected.
This feature is most useful for gathering data for use with software. Unlike the
Data Log setting, data can be saved to memory using “ MEM IN” during TIMED
setting.