HP Storage Essentials NAS Manager Software - Manual (Page 106)

Discovering NAS Devices, Tape Libraries, Switches and Storage Systems 74
IMPORTANT: Provisioning is not supported with the EVA provider.
Discovering HP StorageWorks EVA Arrays
Using Command View EVA 6.x
NOTE: If you have previously discovered EVA arrays by using SMI-S, delete any existing access
points and rediscover. For information about deleting access points, see ” Deleting an Element Using
System Manager or Chargeback Manager ” on page 96.
To discover HP StorageWorks EVA arrays by using the EVA provider, you must enter the following
information for the EVA array:
• User name and password for accessing Command View
• IP address of Command View
HP StorageWorks Command View EVA should be installed on a server before you discover an HP
EVA storage system.
To determine provisioning support for HP StorageWorks Arrays, see
Table 52 on page 359 and
Table 53 on page 360.
Discovery from HP SIM
To discover HP EVA storage systems, provide the following information in HP Insight Manager:
• IP address of Command View. See ” Adding an IP Range for Scanning ” on page 27 or ” Adding
a Single IP Address or DNS Name for Discovery ” on page 28 for more information.
• User name for accessing Command View
• Password for accessing Command View.
Discovery from HP SE
To discover HP EVA storage systems:
1. Click Tools > Storage Essentials > Home on the HP SIM home page menu. The HP SE home
page opens in a separate web browser window. Click Discovery > Setup in the upper-right
pane of the HP SE home page window.
2. Select Step 1 at the top of the page.
3. Click the IP Addresses tab.
4. Click the Add Address button.
5. In the IP Address/DNS Name field, type the IP address of Command View.
6. Enter the User Name used to access Command View.
7. Enter the Password used to access Command View.
8. If you typed a password in the previous step, retype the password in the Verify Password field.