Discovery from hp se, Discovering cisco switches – HP Storage Essentials NAS Manager Software User Manual
Page 75
Storage Essentials 5.1 User Guide
43
•
IP Address or System name
of the primary IP address of the host running the InVsn software
you want to discover. See ”
Adding an IP Range for Scanning
IP Address or DNS Name for Discovery
” on page 28 for more information.
•
Namespace
- If the //root/cntfabric namespace for the InVSN software is not already included
in the wbemportlist.xml file on the server running HP SIM, add this namespace as described in
the HP SIM documentation.
•
Port number
for the InVsn software. Enter its port number on the System Protocol Settings page
(Options > Protocol Settings > System Protocol Settings) under the WBEM section. Refer
to the SIM documentation for more information.
•
User Name
for the login to the InVsn software.
•
Password
for the login to the InVsn software.
Refer to the HP SIM documentation for more details.
Discovery from HP SE
To discover CNT switches:
1.
Before you can discover a CNT switch, you must do the following in the CNT InVsn Enterprise
Manager software:
a. Open the file ProductInfo.ini in a text editor, such as Notepad. If the software was
installed in the default directory, this file should be in the following directory:
\Program Files\CNT\inVSN_EM
b. Change the following entry in the file:
cimomenabled=TRUE
c. Save the file, then restart the InVsn software.
2.
In the IP Address/DNS Name field, type the primary IP address of the host running the InVsn
software you want to discover followed by its namespace and port number, as shown in the
following example:
192.168.10.76//root/cntfabric:5989
where
• 192.168.10.76 is the IP address of the host running the InVsn software
• //root/cntfabric is the namespace
• 5989 is the port number
3.
In the User Name field, type the user name for the login to the InVsn software.
4.
In the Password field type the password for the login to the InVsn software.
5.
In the Verify Password field type the password you provided previously.
6.
Click Start Discovery.
Discovering Cisco Switches
The management server discovers Cisco switches through SNMP (Simple Network Management
Protocol) and SMI-S (Storage Management Initiative Specification) connections—depending on the
model of the Cisco switch. See the Support Matrix for details on supported switch models and
firmware revisions.