HP Storage Essentials NAS Manager Software - Manual (Page 607)

Storage Essentials 5.1 User Guide 575
For example, the element displayed in the following figure is about 75 percent available. The
rest of it is being used.
Figure 77 Capacity of an Element
You can obtain more detailed information about an element by clicking it in the right pane or in the
Capacity Manager tree, as explained in the topic ” Finding the Capacity of an Element ” on
page 579.
About the Capacity Chart Tab
The Capacity Chart tab lets create bar or line charts to view your capacity data. You can use these
charts to display trending information. See ” Viewing Capacity Charts ” on page 585 and ” Viewing
Trending Information for Storage Capacity ” on page 587 for more information.
Accessing Capacity Manager
To access Capacity Manager, do one of the following:
• Click Tools > Storage Essentials > Chargeback Manager.
• Click Tools > Storage Essentials > Home. Then, click Capacity Manager in the left
pane.
About the Toolbars in Capacity Manager
Capacity Manager provides two toolbars. One in the upper pane and another in the lower pane.
The toolbar in the upper pane is the same as the one in System Manager. See ” About the Toolbar
in System Manager ” on page 258 for information about the toolbar in the upper pane.
When the Capacity Chart tab is active, the toolbar in the lower pane provides the following
information:
Unmapped (storage systems only)
Figure 76 Legend for Capacity Manager