HP Storage Essentials NAS Manager Software - Manual (Page 67)

Storage Essentials 5.1 User Guide 35
Brocade switches
(SMI-S*)
Enter the IP address/DNS name,
user name and password of the
Brocade SMI-S proxy server to
discover it. The user name (default
admin) and password must be for
the Admin Account. Note that some
SMI-S providers require you to
specify the server using its IP
address: http://IPADDRESS.
See ” Discovering Brocade
Switches ” on page 37.
CNT switches Enter the IP address and the port
number for the InVsn Software that
manages the switch as well as the
user name and password.
See ” Discovering CNT Switches ”
on page 41.
Cisco switches
(SMI-S)*
Enter the IP address/DNS name of
the Cisco switch as well as the user
name and password of the switch.
All SMI-S switches require a user
name and password.
See ” Discovering Cisco Switches ”
on page 43.
Cisco switches
(SNMP)
Enter the IP address/DNS name of
the Cisco switch. Enter the SNMP
read-only community string as the
user name. You do not need to
enter a password if you discover it
in HP SE. HP SIM requires a
password.
See ” Discovering Cisco Switches ”
on page 43.
QLogic switches
(SMI-S)*
Enter the IP address/DNS name of
the QLogic SMI-S switch as well as
the user name and password of the
switch. All SMI-S switches require a
user name and password.
See ” Discovering Sun StorEdge
and QLogic Switches ” on
page 45.
Sun StorEdge and
QLogic switches
(SNMP)
Enter the IP address/DNS name of
the Sun StorEdge or QLogic switch.
Enter the SNMP read-only
community string as the user name.
You do not need to enter a
password if you discover it in HP
SE. HP SIM requires a password.
See ” Discovering Sun StorEdge
and QLogic Switches ” on
page 45.
Table 6 Discovery Requirements for Switches (continued)
Element Discovery Requirements Additional Information