HP Storage Essentials NAS Manager Software - Manual (Page 95)

Storage Essentials 5.1 User Guide 63
Engenio storage
systems
Can be discovered two ways:
• Entering the IP address/DNS
name, user name and password
of a controller for an Engenio
storage system. Discovers only
the corresponding IP address of
the controller.
• Entering the IP address/DNS
name, user name and password
of a proxy that is used to
manage an Engenio storage
system. Discovers all controllers
known to the proxy.
See ” Discovering Engenio Storage
Systems ” on page 68.
HDS storage
systems
Discover the server running
HiCommand Device Manager.
See ” Discovering HDS Storage
Systems ” on page 69 for more
information.
HP storage systems Discover the server running the HP
CIMOM.
See ” Discovering HP
StorageWorks XP Arrays ” on
page 77.
IBM Storage
Systems
Discover the CIMOM that talks to
the IBM storage systems you want
to monitor.
See ” Discovering IBM Storage
Systems ” on page 80.
Sun StorEdge 3510 Discovered through proxy software
called Sun StorEdge™
Configuration Service. On the
discovery page the user should
enter the hostname or IP address of
the computer running the Sun
StorEdge 3510 SMI-S provider.
See ” Discovering Sun StorEdge
3510 Storage Systems ” on
page 82.
Sun StorEdge 6920
and 6940
Discover the storage system directly. See ” Discovering Sun StorEdge
6920 and 6940 Storage Systems ”
on page 84.
Sun StorEdge 6130 Discover the storage system directly.
The username does not matter. The
password matters only for
provisioning.
See ” Discovering Sun StorEdge
6130 Storage Systems ” on
page 85.
Xiotech Storage
Systems
Discover the storage system directly. See ” Discovering Xiotech Storage
Systems ” on page 86.
Table 11 Discovery Requirements for Storage Systems, Tape Libraries & NAS Devices (continued)
Element Discovery Requirements Additional Information