HP Storage Essentials NAS Manager Software User Manual
Page 176
Discovering Applications, Backup Servers and Hosts
144
least one LUN rendered by each controller of the array. Then, you must make the management
server aware of that host, as described in the following steps:
1.
Install the CIM Extension on a host that has access to the Engenio storage system.
2.
Discover that host.
3.
Select Optimize > Storage Essentials > Performance Data Collection.
4.
Verify the Data Collection tab is displayed.
5.
Click the Start button corresponding with the disk drive statistics for an Engenio storage system.
6.
Set the date and time. See ”
Setting the Date and Time for Performance Collectors
7.
Type a repeat interval and then select a unit of measurement from the drop-down menu.
The repeat interval determines how often the collectors gather the data.
8.
Select a proxy host by clicking the Browse button.
9.
Select a proxy host from the drop-down menu and then click OK.
The management server displays in the drop-down menu only hosts that are running a CIM
Extension version 3.5 or later and have access to the corresponding Engenio storage system.
NOTE:
You can always change the proxy host by returning to this page or by going to the
Properties
tab for an Engenio storage system. Double-click the Engenio storage system in
System Manager. Click the Properties tab. Then, click the Browse button on the Properties
tab.
10.
Saving the proxy host may take time. When you are asked if you want to continue, click OK.
11.
Click OK again to set the time for starting the collector.
12.
If you do not see any hosts displayed verify you have the latest CIM Extension installed and
running on a host that can access the Engenio storage system.