Zone operation, Step 1 - select storage system – HP Storage Essentials NAS Manager Software User Manual
Page 469
Storage Essentials 5.1 User Guide 437
4.
Do one of the following:
• If you want the job to execute now, click the Execute Job ( ) button
• If you want the job to execute at a later time, schedule the job as described in the topic,
Zone Operation
Keep in mind the following:
•
If you have options still selected from a previous job, just clear the options you do not want in
your next job. For example, assume you created a zone. Now you want to create a new zone
that includes the same host used previously. Just clear the Zone pane. To clear a pane, click the
button.
•
If you want to clear all the steps, except for the Step 1 (storage systems), select another option
from the System Action combo-box.
You can use Path Provisioning to perform just zoning operations, as described in the following steps:
1.
Click Tools > Storage Essentials > Provisioning Manager in HP Systems Insight Manager.
2.
In the right pane, click Start Here on the Path Provisioning tab.
3.
Select the following from the System Action combo-box: Zone Operation
Step 1 - Select Storage System
1.
Wait for the management server to load the storage systems into the Storage System panel.
2.
Select a storage system.
NOTE:
The S heading in the Storage Systems pane means that only a single selection is
allowed.
3.
Click the Step 1 button underneath the pane.