HP Storage Essentials NAS Manager Software - Manual (Page 208)

Managing Security 176
<!-- uncomment the following for generic LDAP login-->
<LoginHandlerClass>com.appiq.security.server.LdapLoginHandler</LoginHandler
Class>
<LoginHandlerType>LDAP</LoginHandlerType>
<LDAP>
<!-- same as java.naming.provider.url
ldap://ldap.companyname.com:389
-->
<Server port="389">
IP address or DNS name of LDAP server </Server>
<!-- LDAP env can be added, an example is shown below...
<LDAPEnv
name="java.naming.factory.initial">com.sun.jndi.ldap.LdapCtxFactory</LDAPEn
v>
-->
<ssl>false</ssl>
<ShadowPassword>false</ShadowPassword>
<CaseSensitiveUserName>false</CaseSensitiveUserName>
<!-- multiple DN entries are allowed, they will be tried one at a time -->
<DN>CN=$NAME$,OU=Engineering,DC=mycompanyname,OU=US,DC=COM</DN>
<!-- provide FullNameAttribute and EmailAttribute if full name and email
attribute
are to be synchronized between LDAP and the database -->
<FullNameAttribute>displayName</FullNameAttribute>
<EmailAttribute>mail</EmailAttribute>
</LDAP>
</LoginHandler>
When you are done with your changes, the login-handler.xml file, may resemble the
following:
<LoginHandler>
<AdminAccountName>Administrator</AdminAccountName>
<LoginHandlerClass>
com.appiq.security.server.LdapLoginHandler
</LoginHandlerClass>
<LoginHandlerType>LDAP</LoginHandlerType>
<LDAP>
<Server port="389">IP address of LDAP server</Server>
<ssl>false</ssl>
<ShadowPassword>false</ShadowPassword>
<CaseSensitiveUserName>false</CaseSensitiveUserName>
<DN>CN=$NAME$,OU=Engineering,DC=HP,OU=US,DC=COM</DN>
<FullNameAttribute>displayName</FullNameAttribute>
<EmailAttribute>mail</EmailAttribute>
</LDAP>
</LoginHandler>
Step 2 - Restart the AppStorManager Service and Login as the Designated
Admin Account
In this section, you will restart the AppStorManager service and login as the designated Admin
account.
1. After you modify the login-handler.xml file, you must restart the AppStorManager service,
which is the service for the management server for your changes to take effect.