HP Storage Essentials NAS Manager Software - Manual (Page 585)

Storage Essentials 5.1 User Guide 553
Lets you change the display frequency. Select one of
the following options and then click the button for
your selection to take effect:
• Default - The information is displayed according
to the interval of the performance collector that
gathers information for the graph. For example, if
you set the collector for the graph to every 15
minutes and the period set to Last Hour, the
default setting displays four data points in the
graph. See ” Managing Performance Collection ”
on page 227 for more information about setting
the performance collectors. See ” Creating
Performance Charts ” on page 550 for more
information.
• Hourly - The information displayed is in hourly
increments.
• Daily - The information displayed is in daily
increments.
• Weekly - The information displayed is in weekly
increments.
• Monthly - The information displayed is in monthly
increments.
Click the button after you have modified one or
more of the following combo-boxes for your changes
to take effect:
• Chart
• Unit
• Period
• Frequency
If the chart contains more than one series of data, you
can filter out the additional data series by using this
Filter button.
Lets you modify the performance data displayed in
the graph and change graph settings.
Creates a chart window.
Table 131 Toolbar in Lower Pane of Performance Manager (continued)
Icon Description