HP Latex 360 Printer - Manual (Page 100)

9. When you have finished, press Continue to perform color calibration.
NOTE: ICC profiles are created for the 360 printer only.
10. Enter your substrate name and click Start color calibration. See Color calibration on page 97 .
11. After the automatic color calibration process has completed, we recommend using the generic ICC
profile; alternatively, you can choose to create a new profile or to copy a profile already assigned to a
different print mode for this substrate (if there are any such profiles). The Create ICC profile button is
disabled until color calibration is complete. See
ICC profiles on page 101 .
Change settings while printing
94 Chapter 4 Substrate settings ENWW