HP Latex 360 Printer User Manual
Page 144
6.
Insert the carriage interconnect wiper into the printhead slot at the back. Wipe the electrical contacts by
inserting the tool between the electrical connections at the back of the slot and the steel spring, with
the sponge facing away from you and towards the electrical contacts. Try to avoid picking up any ink
deposit that may have accumulated on the bottom surface of the slot.
CAUTION:
If the carriage remains in the central part of the printer for more than 7 minutes, it
attempts to return to its home position to the right.
7.
Rub the sponge against the contacts with a light force along the entire depth of the flex connector,
inserting the wiper as far as allowed by the mechanical stop on the tool.
8.
Take special care to clean all contacts thoroughly, including the ones at the lowest point of the
connector.
138 Chapter 7 Hardware maintenance
ENWW