HP Latex 360 Printer - Manual (Page 18)

●
Press to go to the previous item.
●
Press to go to the next item.
●
Press to go back to the last-visited screen. This does not discard any changes made in the current
screen.
●
Press to cancel the current process.
Home screen dynamic icons
The following items are displayed only on the home screen.
● At the top left of the screen is a message showing the printer status or the most important current
alert. Press this message to see a list of all current alerts, with an icon indicating the severity of each
alert. You can press an alert to get help in solving the problem.
● At the top right, press to turn on or off the print-zone illumination light.
●
Press to view substrate status and perform substrate-handling operations.
●
Press to open the Substrate Library and access the extensive online library of substrate
presets.
●
Press to view information about the job that is currently printing.
●
Press to view ink-supply status and perform ink-cartridge and printhead operations.
●
Press to view network and Internet status and change related settings.
●
Press to view information about the printer.
●
Press for help.
●
Press to view and change printer settings in general.
If the printer is left idle for some time, it goes into sleep mode and switches off the front-panel display. To
change the time that elapses before sleep mode, press , then Setup > Front panel options > Sleep
mode wait time. You can set a time between 5 and 240 minutes; the default is 25 minutes.
The printer wakes from sleep mode and switches on the front-panel display whenever there is some external
interaction with it.
Information about specific uses of the front panel can be found throughout this guide.
12 Chapter 1 Introduction ENWW