HP Latex 360 Printer - Manual (Page 29)

If the Customer Involvement Program was enabled before clicking the Apply button, a connectivity test is
automatically made to determine whether Customer Involvement Program data can be successfully
delivered to HP.
If the test completes successfully, configuration is complete and you can proceed to any other Embedded
Web Server page, or close the browser window. If the test fails, follow the instructions to try to identify and
fix the problem.
The CIP status and test page of the Customer Involvement Program tab can be used to check the current
status (enabled or not, anonymous data or not), and to run a connectivity test to check that Customer
Involvement Program data can be successfully delivered to HP.
Check printer status
The front panel and the Embedded Web Server both display the status of the printer, the loaded substrate,
and the ink system.
Check the status of the ink system
1. Access the Embedded Web Server (see Access the Embedded Web Server on page 21 ).
2. Go to the Supplies page on the Main tab.
ENWW The Embedded Web Server 23