HP Latex 360 Printer - Manual (Page 64)

The loading accessory (360 only)
The loading accessory is designed to help in loading banner/textile/mesh substrates. It is recommended
when loading such substrates, but not obligatory.
NOTE: The edge holders can be used whether or not you decide not to use the loading accessory.
1. Before loading the substrate, check the Use loading accessory box in the Load Configuration screen on
the front panel.
IMPORTANT: Also check the Assisted manual load box, to prevent crashes between the carriage and
the load accessory. See Assisted manual load on page 61 .
2. Lay the textile loading accessory on the loading table and flip forward enough of the white flaps to
cover the width of the substrate.
3. Pull some of the substrate from the roll and put the leading edge on the loading accessory.
58 Chapter 3 Handle the substrate and troubleshoot substrate issues ENWW