The printer’s main components – HP Latex 360 Printer User Manual
Page 14
Label
Explanation
Hazardous moving parts. Rotating fan blades. Keep hands clear.
These labels are located internally, close to the print-zone
heating fans between fans (360 only), one near the vacuum fan
and one near the aerosol fan. For service personnel only.
Hazardous area. Heating modules operate at hazardous voltages.
Electric shock hazard. Equipment has two input power cords.
Disconnect all power cords before servicing. Power supplies
operate at hazardous voltages.
Double pole, neutral fusing.
Equipment to be connected to earthed mains outlet only.
This label is located in the scan and air-curtain heater control
enclosure (360 only). For service personnel only.
NOTE:
The final label position and its size on the printer may vary slightly, but should always be visible and
close to the potential risk area.
The printer’s main components
The above image is a QR code containing a link to a video; see
.
The following views of the printer illustrate its main components.
8
Chapter 1 Introduction
ENWW