HP Latex 360 Printer User Manual

Page 63

Advertising
background image

e.

Do the same on the other side.

Follow the same method to re-install the platen when required.

Replace the blue ink collector consumables

The length of substrate that you can print with the same ink collector consumables depends on the porosity
of the substrate and the quantity of ink used on the print. If you see that the substrate is dirty when printing,
stop printing and change the ink collector consumables. Failure to do so could cause some parts of the
printer to malfunction.

1.

You are recommended to wear the gloves that are included in the kit.

2.

Press both snaps with your thumbs and lift the ink collector consumables vertically out of the printer.

3.

Dispose of the dirty ink collector consumables.

4.

Ensure that the ink collector is clean. If not, clean it with a damp cloth.

5.

Place the new ink collector consumables into the printer vertically, starting on the right. You will hear a
click when the snaps have been inserted.

ENWW

The ink collector (360 only)

57

Advertising
This manual is related to the following products: