HP Latex 360 Printer - Manual (Page 13)

Label Explanation
Risk of burns. Do not touch the curing zone or the output platen
of the printer: they could be hot.
This label is located on the front of the curing module.
Risk of trapped fingers. Do not touch moving gears.
These labels are located at the rear of the printer, one on the
substrate input gear and one on the take-up reel gear (330 and
360 only).
Moving part. Keep away from the moving printhead carriage.
When printing, the printhead carriage travels back and forth
across the substrate.
This label is located on the rear of the scan axis window, behind
the plastic.
You are recommended to wear gloves when handling the
maintenance cartridge, the platen, or the ink collector.
This label is located on the maintenance cartridge.
Electric shock hazard. Heating modules operate at hazardous
voltages. Disconnect all power sources before servicing.
This label is located on the curing control PCA enclosure. For
service personnel only.
Electric shock hazard. The printer has two input power cords.
Power supplies operate at hazardous voltages. Disconnect all
power cords before servicing.
This label is located internally (in the 360 only), close to the print-
zone heating-coils enclosure between fans. For service personnel
only.
ENWW Safety precautions 7