HP Officejet Lx All-in-One - Manual (Page 153)

5`15
Making Reduced Copies
of Your Original Document
Refer to "Changing Copy Reduction" in chapter 2 to set the copy reduction using the
HP OfficeJet LX Manager or to chapter 6 to use the control panel menu.
Note: When you have the resolution set to Photo and Copy Reduction to 100%, your
copies will actually be at 98% of the original size, which provides the highest
possible print quality.
Adjusting the Contrast
Refer to "Adjusting the Contrast" in chapter 2 to set the copy reduction using the
HP OfficeJet LX Manager or to chapter 6 to use the control panel menu.
Use this setting: For these kinds of fax originals:
Normal Documents with acceptable lightness/darkness. This is the
factory setting.
Lighten Originals that are too dark.
Darken Originals that are too light.
Note: You cannot make copies in Standard resolution. If the Resolution is set to
Standard , your document will be copied in Fine mode, although the display will
not change to indicate this and the setting will not be changed on the control
panel. The
Standard setting can only be applied to the resolution of outgoing
faxes.
5. Printing &
Cop
y
in
g