HP Officejet Lx All-in-One - Manual (Page 74)

4`6
Preparing to Send a Fax (Send Setup)
Before sending faxes from your PC, either from Windows or directly from Eclipse FAX SE, you may want to
use Send Setup to change the
Resolution or to modify the Cover Page Information that was entered during
installation. Send Setup has one other setting, New Page Paper Size . For information about this setting, see
"Setting the New Page Paper Size." You don't need to use Send Setup unless you want to change one or more
of these settings.
To use Send Setup, follow these steps.
1. Open Eclipse FAX SE. (Remember that the HP OfficeJet LX Manager must be running.)
2. Choose Send/Setup from
the menu bar. The Send
Fax Setup dialog box
appears.
3. Optionally, change the
Resolution .
:
Standard resolution
(the default) is 204 x
98 dpi.
:
Best Available
resolution is 204 x 196
dpi.
Note: For faxes sent from your PC only, the resolution that you choose here will override the setting
made with the HP OfficeJet LX Manager or the control panel. It will not affect the resolution of
paper faxes.
4. Optionally, in the Cover Page Information box, change any of the entries that were made during
installation.
5. When you have completed this dialog box, click the OK button. Click the Cancel button at any time to
close the dialog box without saving your changes; click the Help button to access the online help.