HP Officejet Lx All-in-One - Manual (Page 183)

7`14
And requires this action: Has this meaning: This message:
Poll cancelled You pressed Stop after setting up a
document to be polled. Your
to-be-polled setup has been cancelled. No action is required.
Press START to send
Group full You have entered the limit, 10 fax
numbers, while sending to a group of
fax numbers (broadcasting). Press the Start/Copy to begin sending
the fax to your group.
Printer busy The printer is in the middle of printing a
file from your PC, so it is temporarily
unavailable for other types of printing. Wait for the print job to finish before
starting another operation that requires
printing (such as copying or printing
reports).
Printing. . .
(Date and Time) The HP OfficeJet LX is printing a file
from your PC. No action is required. You may send a
fax while printing, if desired. Received
faxes will be stored in memory, then
printed when your print job is complete.
Printing. . .
Waiting for data The printer has paused to wait for
further print data. Usually, no action is required.
However, if you are waiting for the last
page of your print job at the time you
see this message, press Load/Eject to
eject the last page.
Ready
Out of fax paper Either there is no paper loaded in the
paper tray, or the wrong size paper is
loaded for printing received faxes,
making copies, or printing reports from
the menu. If you want to be able to print received
faxes, make copies, or print reports
from the menu: Load Letter-, A4-, or
Legal-size paper into the paper tray
using the instructions in "Loading Paper
for Receiving Faxes and Making
Copies" in chapter 4.
Redial pending
Try again later You tried to send a fax from the fax
loading tray while a memory-stored fax
was waiting to redial (sending to a
group or sending a delayed fax). Wait until the memory-stored fax has
been sent before sending a fax from the
fax loading tray.
Remove document
and reload The HP OfficeJet LX was unable to
load the document you placed into the
fax loading tray. Remove the document from the fax
loading tray, straighten the stack, and
reload it.
(Continued on next page)