HP Officejet Lx All-in-One - Manual (Page 24)

1`6

Remove the output tray from the
HP OfficeJet LX.

Remove the two pieces of cardboard that hold the
"wings" in place. First release the cardboard by
flipping the top piece up with your thumb (
1
below). Then remove the cardboard by pulling
down on the bottom piece (
2 below).
OJ-72
OJ-68
OJ-69

Replace the output tray.
(Refer to the illustration in Step 5 above.) Helpful Hints:
N
Leave the front panel and the top cover
open for Step 1c, "Install the Print Cartridge."
N
Save the carton and packing material in case
you need to move or ship your HP OfficeJet
LX later.