HP Officejet Lx All-in-One - Manual (Page 176)

7`7
HP Canada
Customer Support
Center Eastern Canada
(800) 268-1221
Western Canada
(800) 361-9791 Technical Assistance
with setup, operation,
repair, and exchange
program information 7:00 am - 4:00 pm
weekdays
HP Canada
Customer
Information
Center HP Canada
Customer Information
Center
5150 Spectrum
WayMississauga,
OntarioL4W 4V1 Mailing address
forcorrespondence
Post-Warranty
Support
(fee-based
support)
(800) 999-1148
$25.00 fee per call,
Visa or MasterCard
*prices subject to
change without notice Post-warranty
assistance on
product questions
and the most
common software
applications 7:00 am - 6:00 pm
MST
Mon, Tu, Th, Fri
7:00 am - 4:00 pm
MST
Wed
Error Notification: Beeps, Blinking Light, Message
The HP OfficeJet LX notifies you with sound (beeps), a blinking See Display light, and a
message under the following conditions.
For this error condition: Here's how you'll be notified:
An unavailable button was pressed.
You pressed a button with a function that wasn't
available at that time. (Example: You can't use
the Menu button while sending a fax.) Three short beeps.
An error interrupted an activity
in progress.
An error occurred which has interrupted or
cancelled the current activity. (Example: If you
lift the top of the control panel while sending a
fax, the fax will be cancelled.) You may need to
take some action to clear the error before
continuing to use the HP OfficeJet LX. Look up
the displayed message in the following section
for more information. Nine short beeps. See Display light blinks on
and off. An error message is displayed that
describes the problem and tells you how to
solve it, if applicable.
A serious internal problem was detected. A
serious problem with the internal
mechanical or electronic components has been
detected. Service is required. Nine short beeps. See Display light blinks on
and off. A "SYSTEM ERROR" message is
displayed along with a three-digit code.
(You can look up this message in the
"Understanding the Displayed Messages"
section later in this chapter.) Please record
this code before calling for service.
7. Troubleshooting