HP Officejet Lx All-in-One - Manual (Page 185)

7`16
And requires this action: Has this meaning: This message:
Storing. . .
Memory used: xx% You are storing a document in memory
to be faxed later, or to be sent to a
group of fax numbers. The bottom line
shows you how much of the memory is
being used to store the document.
There's a total of about 24 pages (400
KB) of memory available for faxing
and copying. Wait until the storing is complete to
make sure your document will fit into
the available memory. If your document
won't fit in memory, a message will tell
you what to do next.
SYSTEM ERROR nnn
Call for service A very serious error has occurred that
requires servicing. Record the error number, then do one of
the following:
If the error number begins with "1":
Turn off the power, then turn it on
again. If the error message is gone, you
may be able to continue using the HP
OfficeJet LX. But if the error message
remains, contact HP's Customer
Support Center to service your device.*
It cannot be used until it is serviced.
If the error number begins with "2":
Contact HP's Customer Support Center
to service your HP OfficeJet LX.*
There's a problem with the scanning
device, so you won't be able to reliably
send faxes or make copies. However,
you will continue to be able to receive
faxes, print files from your PC, and
print reports. Press Stop to clear the
error message.
If the error number begins with "3":
Contact HP's Customer Support Center
to service your HP OfficeJet LX.*
There's a problem with the internal part
that controls fax transmissions, so you
won't be able to send or receive faxes.
However, you will be able to make
copies, print files from your PC, and
print reports. Press Stop to clear the
error message.
* Refer to "Getting Help" earlier in this
chapter for the appropriate phone
number.
(Continued on next page)