HP XP7 Storage - Manual (Page 111)

paths managed by HDLM, and the information of the paths excluded from
automatic failback are initialized. Intermittent error monitoring continues.
-expathusetimes number-of-path-use-times
Specifies the number of times the same path can be used for sequential
I/O operations when the extended Round Robin (exrr), Least I/Os
(exlio), or Least Blocks (exlbk) algorithm is used for load balancing.
You an specify a decimal (base 10) value from 1 to 999999. The default is
100.
-dpc {on|off} [-pathid path-ID -lu | -pathid path-ID -storage]
Enables or disables the dynamic I/O path control function for each
storage system or LU. The default value is "off".
on: Enabled
off: Disabled
-pathid path-ID -lu
Sets the dynamic I/O path control function to enabled or disabled for
each LU. Specify one of the IDs of the paths connected to the target
LU.
-pathid path-ID -storage
Sets the dynamic I/O path control function to enabled or disabled for
each storage system. Specify one of the IDs of the paths connected to
the target storage system.
If the -pathid parameter is not specified, the setting is performed for
each system, and the setting for each storage system or LU is cleared.
Notes:
If the host is restarted, settings for the storage system or LU are
cleared, and the host operates according to the system settings.
-dpcintvl checking-interval
Specifies the checking interval (in minutes) for reviewing information
about switching of controllers performed by the storage system which is
used in the dynamic I/O path control function. Specify a value in the
range from 5 to 1440. The default value is "10".
-s
Executes the command without displaying the message asking for
confirmation of command execution from the user. Specify this parameter
if you want to skip the response to the confirmation message: for
example, when you want to execute the command in a shell script or
batch file.
To Set the Remote Management Client Operating Environment
-lic
Specify this option for when a license is updated. The HDLM license is
provided via a license key or license key file. A license key file is a file
that stores the HDLM license key.
Command Reference
6-19
Hitachi Dynamic Link Manager (for VMware®) User Guide