HP XP7 Storage - Manual (Page 159)

File names are created by using the value in the Hitachi Network
Objectplaza Trace Library utility's Output (folder and prefix), adding
2 onto the end, and then adding a file number onto the end of that. The
default file names range from hntr21.log to hntr216.log. Note that 2 is
part of the integrated trace file name and does not represent part of the
file number.
The dlmrmcenv Utility for Configuring HDLM Remote
Management Client Environments
If you are managing HDLM by using Global Link Manager, this utility registers
the managed host's user account information on the remote management
client.
To execute the dlmrmcenv utility, the Credential Store file must already be on
the remote management client
# .
#
The Credential Store file is managed by the VMware vSphere CLI, and
contains host information (host name, user name, and password).
The default storage location of the Credential Store file is as follows:
%APPDATA%\VMware\credstore\vicredentials.xml
To create the Credential Store file, execute the VMware vSphere CLI
script (credstore_admin.pl).
Format
Execute the dlmrmcenv utility from VMware vSphere CLI.
dlmrmcenv {[--username "user-name"] [--credstore "Credential-
Store-file-path"] | --output | -h}
Parameters
--username "user-name"
Specifies the name of the user account that was created on the host.
If the name of the user account that was created is GLMUser, this
parameter can be omitted.
--credstore "Credential-Store-file-path"
Specifies the path of the Credential Store file that is stored on the remote
management client.
If the Credential Store file is stored in the default folder, this parameter
can be omitted.
--output
Utility Reference
7-7
Hitachi Dynamic Link Manager (for VMware®) User Guide