HP XP7 Storage - Manual (Page 136)

Displayed Item
Description
No
summary
displayed
Summary
displayed
VmPathUID
#
1
- The UID of the path managed by VMware vSphere. This
item is displayed when specified in a value of the -path -
item parameter.
Physical-
LDEV - The model ID, serial number, and iLU number of a physical
volume are separated by periods and displayed.
You can identify the physical volume from this information.
If the volume is not virtualized, a hyphen (-) is displayed.
Virtual-
LDEV - Displays the model ID, serial number, and iLU number of a
virtual volume, separated by periods.
You can identify the virtual volume from this information. If
the volume is not virtualized, a hyphen (-) is displayed.
Physical-
DskName - When a path is migrated using a virtual ID, displays the
name of the storage system that is connected by the
migration-destination path.
A storage system name consists of the following three
elements, separated by periods:
•
Vendor ID: The name of the storage system vendor.
• Product ID: Indicates the storage system product ID,
emulation type, or model name.
• Serial number: The serial number of the storage
system.
When a virtual ID is not used, a hyphen (-) is displayed.
Physical-
iLU - When a path is migrated using a virtual ID, displays LU
number in the storage system that is connected by the
migration-destination path.
•
For HUS VM, indicated by a hexadecimal number. The
first two characters of iLU are the CU number, and the
last two characters are the internal LU number within
the CU.
• For Hitachi Virtual Storage Platform, indicated by a
hexadecimal number. The first two characters of iLU
are the number of the logical DKC (Disk Controller), the
middle two numbers are the CU number, and the last
two characters are the internal LU number within the
CU.
When a virtual ID is not used, a hyphen (-) is displayed.
Physical-
ChaPort - When a path is migrated using a virtual ID, displays port
number of the CHA that is connected by the migration-
destination path.
When a virtual ID is not used, a hyphen (-) is displayed.
Org-
DskName - For HAM environments, the name of the storage system on
the secondary volume (S-VOL) is displayed.
A storage system name consists of the following three
elements, separated by periods:
6-44
Command Reference
Hitachi Dynamic Link Manager (for VMware®) User Guide