HP XP7 Storage - Manual (Page 149)

Displayed item
Description
No summary
displayed
Summary
displayed
the logical DKC (Disk Controller), the middle
two numbers are the CU number, and the
last two characters are the internal LU
number within the CU.
If an HAM environment is not used, a hyphen (-)
is displayed.
Legend:
- : Not displayed
#1
This information is displayed when one of the following conditions exist:
- The user selected the item to be displayed by using the -lu -item
parameter.
- all was specified.
- No value was specified for the parameter.
#2
This storage system applies when the dynamic I/O path control function is
disabled.
To display the format of the view operation
-help
Use this parameter to display the view operation format.
Example 1
The following example displays the format of the operation for both a host
and remote management client:
PROMPT>dlnkmgr view -help
view:
Format
dlnkmgr [Host-Connection-Options] view -sys
[ -sfunc | -satp | -rule ] [-t]
dlnkmgr [Host-Connection-Options] view -path
[-iem] [-hbaportwwn] [-vmruntimename] [-vmstate]
[ -hdev HostDeviceName ] [-stname] [-srt {pn | lu | cp}] [-t]
dlnkmgr [Host-Connection-Options] view -path
-item [pn] [dn] [lu] [cp] [type] [ic] [ie] [dnu] [hd] [iep]
[hbaportwwn] [vmruntimename] [vmstate]
[vmpathuid]
[phys] [virt] [vid] [ha]
[-pstv | -vstv] [ -hdev HostDeviceName ] [-
stname]
[-srt {pn | lu | cp}] [-t]
dlnkmgr [Host-Connection-Options] view -path -c
[-pstv | -vstv] [-stname] [-
Command Reference
6-57
Hitachi Dynamic Link Manager (for VMware®) User Guide