HP XP7 Storage - Manual (Page 142)

PROMPT>dlnkmgr view -lu -item dpc
Product : HUS100
SerialNumber : 9203008
LUs : 3
Dynamic I/O Path Control : on*
iLU HDevName DPC PathID Status
000006 t10.HITACHI_770101520191 on 000000 Online
000003 Online
000007 t11.HITACHI_770101520191 off 000001 Online
000004 Online
000008 t12.HITACHI_770101520191 on 000002 Online
000005 Online
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
To display a summary of LU information
-lu -c
When the -c parameter is specified with the -lu parameter, a summary
of LU configuration information is displayed on one line. The total number
of paths recognized by HDLM and the number of online paths are
displayed for each LU. You cannot specify the -c parameter together with
the -hdev or -pathid parameter.
For details on the contents of each display item, see
Table 6-14 LU
Information on page 6-51 .
The sub-parameters are as follows:
-pstv|-vstv
If the -pstv parameter is specified, information about the physical
storage system is displayed. If the -vstv parameter is specified,
information about the storage system recognized by the operating
system is displayed. If neither parameter is specified, information is
displayed according to the value specified in the -pstv parameter of
set operations.
For information about the items that are displayed differently
depending on the specified -pstv and -vstv parameters, see Table
6-6 Display items for which the display results of the view operation
differ depending on the -pstv parameter specification on page 6-22 in
Parameters on page 6-17 .
-t
Omits the title for each information item.
Example
The following example shows how to display a summary of LU
information (without selecting items to be displayed):
PROMPT>dlnkmgr view -lu -c
6-50
Command Reference
Hitachi Dynamic Link Manager (for VMware®) User Guide