HP XP7 Storage - Manual (Page 66)

2
.
Execute the firewall_setup command.
3
.
Check the displayed message to make sure that the command was
executed successfully.
The command ended successfully.
firewall_setup command syntax
The firewall_setup command registers ports used by Hitachi Command
Suite Common Agent Component into the exceptions list of Windows Firewall
running on the remote management client.
The firewall_setup command is stored in the following location, depending
on whether the Device Manager agent is installed.
• Device Manager agent is installed:
program-installation-destination-drive:\Program Files
# \Hitachi
\HDVM\HBaseAgent\bin\firewall_setup.bat
• Device Manager agent is not installed:
program-installation-destination-drive:\Program Files
# \HDVM
\HBaseAgent\bin\firewall_setup.bat
#
For Windows 7 (x64) , Windows Server 2008, and Windows Vista (x64),
Program Files is Program Files (x86).
The following table describes the firewall_setup command syntax.
Table 3-3 firewall_setup command syntax
Item Details
Synopsis firewall_setup {-set|-unset}
Description Registers the ports used by Hitachi Command Suite Common Agent
Component into the Windows Firewall exceptions list.
•
Port set for the server.agent.port property (default: 24041/
tcp)
• Port set for the server.http.port property (default: 24042/
tcp)
• Port set for the server.http.localPort property (default:
24043/tcp)
When executing the command, log on as a member of the
Administrators group and execute the command from the
Administrator: Command Prompt window.
Options -set
Adds firewall exceptions.
-unset
Removes firewall exceptions.
3-14
Creating an HDLM Environment
Hitachi Dynamic Link Manager (for VMware®) User Guide