HP XP7 Storage - Manual (Page 148)

Displayed item
Description
No summary
displayed
Summary
displayed
the CU number, and the last two characters
are the internal LU number within the CU.
• For Hitachi Virtual Storage Platform,
indicated by a hexadecimal number. The
first two characters of iLU are the number of
the logical DKC (Disk Controller), the middle
two numbers are the CU number, and the
last two characters are the internal LU
number within the CU.
When a virtual ID is not used, a hyphen (-) is
displayed.
Physical-ChaPort - When a path is migrated using a virtual ID,
displays port number of the CHA that is
connected by the migration-destination path.
When a virtual ID is not used, a hyphen (-) is
displayed.
- Paths Total number of the paths recognized by HDLM
for the LU to be displayed.
- OnlinePaths Number of available paths in the displayed
paths, indicated by a decimal number. When the
value of Paths equals the value of OnlinePaths,
all paths are online. If the value of OnlinePaths
is less than that of Paths, some paths are
offline. In this case, you should check the offline
paths and take appropriate action for any paths
that have an error status.
Org-Product - For HAM environments, the model ID of the
storage system on the secondary volume (S-
VOL) is displayed.
If an HAM environment is not used, a hyphen (-)
is displayed.
Org-SerialNumber - For HAM environments, the serial number of the
storage system on the secondary volume (S-
VOL) is displayed.
If an HAM environment is not used, a hyphen (-)
is displayed.
Org-iLU - For HAM environments, an LU number in the
storage system on the secondary volume (S-
VOL) is displayed.
•
For HUS VM, indicated by a hexadecimal
number. The first two characters of iLU are
the CU number, and the last two characters
are the internal LU number within the CU.
• For Hitachi Virtual Storage Platform,
indicated by a hexadecimal number. The
first two characters of iLU are the number of
6-56
Command Reference
Hitachi Dynamic Link Manager (for VMware®) User Guide