HP XP7 Storage - Manual (Page 115)

Examples
Example 1
The following example displays the format of the operation for both a host
and remote management client:
PROMPT>dlnkmgr set -help
set:
Format
dlnkmgr [Host-Connection-Options] set
{ -lb on -lbtype { exrr | exlio | exlbk | vmwmru |
vmwrr }
| -iem on [ -intvl Error-Monitor-Interval ]
[ -iemnum Number-Of-Times ]
| -iem off
| -expathusetimes Number-Of-ExPathUseTimes
| -dpc { on | off } [-pathid AutoPATH_ID { -lu | -
storage } ]
| -dpcintvl Dpc-Interval
}
[-s]
dlnkmgr -l set { -lic
| -audlog on [ -audlv AudlogLevel ]
[ -category Category-Value ]
| -audlog off
| -pstv { on | off }
}
[-s]
Host-Connection-Options:
[ -a | --passthroughauth ]
[ -c CONFIG | --config=CONFIG ]
[ -f SESSIONFILE | --sessionfile=SESSIONFILE ]
[ -h VIHOST | --vihost=VIHOST ]
[ -p PASSWORD | --password=PASSWORD ]
[ -r URL | --url=URL ]
[ -s SERVER | --server=SERVER ]
[ -t CACERTSFILE | --cacertsfile=CACERTSFILE ]
[ -u USERNAME | --username=USERNAME ]
[ --credstore=CREDSTORE ]
[ --passthroughauthpackage=PASSTHROUGHAUTHPACKAGE ]
[ --portnumber=PORTNUMBER ]
[ --protocol=PROTOCOL ]
[ --savesessionfile=SAVESESSIONFILE ]
[ --servicepath=SERVICEPATH ]
Valid value
Error-Monitor-Interval { 1 - 1440 }(Minutes) (Default Value 30)
Number-Of-Times { 1 - 99 }(Times) (Default Value 3)
AutoPATH_ID { 000000 - 999999 }(Decimal)
Dpc-Interval { 5 - 1440 }(Minute) (Default Value 10)
AudlogLevel { 0 - 7 } (Default Value 6)
Category-Value { [ss] [a] [ca] |
all } (Default Value
all)
KAPL01001-I The HDLM command completed normally. Operation name =
set, completion time = yyyy/mm/dd hh:mm:ss
Command Reference
6-23
Hitachi Dynamic Link Manager (for VMware®) User Guide