HP XP7 Storage - Manual (Page 139)

sorting key is iLU and its configuration information is displayed for each
LU.
For details on the content of each displayed item, see
Table 6-14 LU
Information on page 6-51 .
The sub-parameters are:
-pstv|-vstv
If the -pstv parameter is specified, information about the physical
storage system is displayed. If the -vstv parameter is specified,
information about the storage system recognized by the operating
system is displayed. If neither parameter is specified, information is
displayed according to the value specified in the -pstv parameter of
set operations.
For information about the items that are displayed differently
depending on the specified -pstv and -vstv parameters, see Table
6-6 Display items for which the display results of the view operation
differ depending on the -pstv parameter specification on page 6-22 in
Parameters on page 6-17 .
-hdev host-device-name|-pathid AutoPATH_ID
Displays information only for the paths accessing the specified host
device, if the -hdev parameter is specified.
If the -pathid parameter is specified, only information about the LU
connected to the path with the specified AutoPATH_ID is displayed.
-t
Omits the title for each information item.
Example
The following example shows how to display the LU information
without selecting items to be displayed:
PROMPT>dlnkmgr view -lu
Product : SANRISE_AMS
SerialNumber : 77010152
LUs : 1
iLU HDevName PathID Status
0191 t10.HITACHI_770101520191 000000 Online
000001 Online
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
To display LU information (by adding items to be displayed)
-lu -item
The items specified with the -item option are displayed among with those
displayed by the -lu option.
When the value of the -item parameter is omitted or all is specified, all
the items, except for DPC, Physical-LDEV, Virtual-LDEV, Physical-
Command Reference
6-47
Hitachi Dynamic Link Manager (for VMware®) User Guide