HP XP7 Storage - Manual (Page 126)

displayed according to the value specified in the -pstv parameter of
set operations.
For information about the items that are displayed differently
depending on the specified -pstv and -vstv parameters, see Table
6-6 Display items for which the display results of the view operation
differ depending on the -pstv parameter specification on page 6-22 in
Parameters on page 6-17 .
-hdev host-device-name
Displays information only for the paths accessing the specified host
device.
The host-device-name string is case-sensitive.
-stname
Use this parameter to display the model ID of the storage system in
the product ID element of the DskName field. When this parameter is
omitted, the command displays the product ID or emulation type of
the storage system instead.
For details about the information displayed for product IDs, see
Table
6-12 Product ID displayed by the view -path operation on page 6-46 .
-iem
Use this parameter to add IEP to path information and display
information about intermittent errors.
-srt {pn|lu|cp}
Use this parameter to sort the path information in ascending order,
according to the specified sorting keys.
The sorting keys are as follows: the first sorting key is the name of
the storage system (DskName), the second sorting key is the value
specified by the -srt parameter, and the third sorting key is
AutoPATH_ID.
The available parameter values to specify the second sorting key are:
• pn: Path name
• lu: LU number of the storage system
• cp: Port number of the CHA
When the -srt parameter is omitted, the path information is listed in
ascending order of AutoPATH_IDs.
-hbaportwwn
Displays port WWN information for the HBAs connected to the storage
system.
-vmruntimename
Displays the runtime information for paths managed by VMware
vSphere in place of the PathName item.
-vmstate
6-34
Command Reference
Hitachi Dynamic Link Manager (for VMware®) User Guide