HP XP7 Storage - Manual (Page 75)

• If firewall exceptions have been registered by using the firewall_setup
command, remove them. Make sure that you do not use another Hitachi
Command Suite product to manage the host after removing HDLM.
For details about the firewall_setup command, see the description of
firewall_setup syntax in
Specify Windows Firewall settings on page
3-13 of Settings When Managing HDLM by Using Global Link Manager on
page 3-11 .
Removing HDLM
The procedure for removing HDLM is described below. Perform the removal
process on the host and the remote management client.
Removing HDLM from a host
The removal of HDLM from a host is performed using the VMware vSphere
CLI on the remote management client.
1
.
Log on to Windows on the remote management client as a member of the
Administrators group.
2
.
Start the VMware vSphere CLI on the remote management client.
3
.
Execute the following command to check the name of the HDLM offline
bundle file.
esxcli --server=host-name --username=user-name --
password=password software vib list | findstr hdlm
4
.
Remove HDLM.
Execute the command below. In the -n parameter, specify the offline
bundle file name you identified in step 3.
esxcli --server=host-name --username=user-name --
password=password software vib remove -n offline-bundle-file-name
5
.
Return the acceptance level of the host to what it was before you installed
HDLM.
Execute the command below. In the --level parameter, specify the
acceptance level value that you noted before installing HDLM.
esxcli --server=host-name --username=user-name --
password=password software acceptance set --level=acceptance-
level
6
.
Restart the host.
7
.
Execute the following command to check the list of devices.
Check the management-target devices of HDLM.
esxcli --server=host-name --username=user-name --
password=password storage nmp device list
:
Creating an HDLM Environment
3-23
Hitachi Dynamic Link Manager (for VMware®) User Guide